## Friday, June 9, 2017

### What is Equivalence Partitioning Technique? | David Tzemach

This Black-Box test technique can be used at any level of testing (Unit, Component, Integration and system). It is used to determine the set of valid and invalid inputs specified for the tested object and dividing it up into partitions of data inputs that according to the application requirements should behave the same when used as an input (the application behavior should be the same when tested with these inputs).

The main advantage of this method, is that it allows the tester to validate the tested object with a narrow set of test inputs because he will use a single condition from each class instead of all available inputs (remember that we assume that all inputs in a single class will behave the same, therefore we can test only single value).

The assumptions are:
If a single value from a class is working, then we can assume that all values of the class will work the same once used as input.

If a single value from a class is NOT working, then we need to validate the object with further inputs of the same class.

• The probability of uncovering defects with the selected test inputs are higher.
• We will cover different domain inputs (Valid/Invalid).
• We will reduce the number of test cases.
• We will reduce the testing time.

There is one main disadvantage in ECP that you must remember, assuming in testing is a big mistake! Therefore, you should use this method wisely, and test more than a single value if you know that a specific area has more chances to trigger defects or when you know that there is a higher risk.

So How can we use this method?
The tested object is an input field where the user needs to specify is age, the requirements are:
• The user can insert any number between 25 – 100.
• The user can insert any number between 5 – 15.
• The user cannot use negative numbers.

As you can see, we will not want to test all inputs that are available for testing; therefore, we will use the EP method to create the following partitions:

Class no'1: 25 <= Input <= 100 (Positive)
Class no'2: 5 <= Input <= 15 (Positive)
Class no'3: 16 <= Input <= 24 (Invalid)
Class no'4: Input > 100 (Invalid)
Class no'5: Input < 0 (Invalid)
Class no'6: 0 <= Input <= 4 (Invalid)

Now, all you need to do to validate the tested input field is to use one set of dates that belongs to each partition (six values in total), and you can see, we covered the main scenarios in 6 tests instead of running a large number of tests that will not add any real benefit/value to the testing effort.